SAN Unit Firmware Version ID

The SAN Firmware Version can be viewed from the SAN unit display at any time by bypassing the SAN unit (using the bypass switch on the front panel) and selecting PARM 00 D-NO 01 as shown below on the display.  To do this, first push the mode button three times to move the cursor to the last digit in the display, then press the up arrow one time so the display reads "0001" as the bottom digits.  The firmware version is displayed in the top digit area (shown as 1.14 here)

(Note: Although the unit shown is labeled for the AFC1500 system, the Enforce system uses the identical hardware except that it uses a gold front panel.  The firmware version ID is identical in either system)