Axis ID

Page Menu

Up
ISA Axis ID
ISA Rdisk ID
Axis ID
Old Multi ID
Old Rdisk ID

AFC1200 Axis Firmware version

There are three methods to identify the Firmware version which is running in the AFC1200 Axis Unit. One method is using the AFC Software (from the "Axis" pulldown menu, click on "Axis Software Version" and follow directions)

Another is to place the unit into Bypass using the bypass switch on the front of the unit. Depress the Data up button until D-NO = 01. The Firmware version is displayed in the DATA area shown below as version 2.24.

Version number displayed as "4.00"

The Final method is to read the version number off the EEPROM tag. the EEPROM is located on the left side of the unit. Newer units have a window cutout in the cover and can be read without removing the cover. Older units do not have a access window and may need the cover removed to see the chip tag. T

EEPROM window cutout with tag plainly visible