|
1.
|
How do I program fastening preset
parameters into the SAN Unit (axis) without the
AFC Software? |
|
ANSWER
|
| 2. |
My System's Abnormal LED is lit.
How do I find out what the abnormal
was without the AFC Software? |
|
ANSWER
|
| 3. |
How do I program the 1500 system? |
|
ANSWER
|
| 4. |
I am having problems
communicating with my
AFC Software and suspect multiple spindle
Axis Units have multiple versions of Firmware running. How do I know what
version of Firmware the Axis Unit is running? |
|
ANSWER
|
| 5. |
What is causing the
fastening reject I receive from the system? |
|
ANSWER
|
| 6. |
I have an Abnormal 5
Sub 0 failure. What should I do? |
|
ANSWER
|
| 7. |
With systems including touch screen
industrial computers running the
AFC Software, how come the touch panel cursor
doesn't move to where I'm pointing? |
|
ANSWER
|
| 8. |
Why am I getting a communication error
with the AFC Software while halfway through uploading or downloading? |
|
ANSWER
|
| 9. |
As soon as I try to
upload/download using the
AFC Software
I get a communication error. Why? |
|
ANSWER
|
