How do I program the AFC 1100 system?
The 1100 system can be programmed with
two different methods.
- One is with the use of the
AFC
Software package running in a computer connected to the system via RS485
connection. This package allows communication to all spindles
connected to the system. It's specific features include Preset Parameter
Upload/Download, Torque/Angle Fastening Curve display/saving, Fastening
data monitoring/statistics/storage, Printer/Communication Port
configuration & Security function set-up. (download
request form)
-
The second programming method available is with the Axis Unit programming
buttons on the front of each unit. This allows
programming/monitoring of all preset/fastening parameters of individual
spindles.
Please refer to Chapter 7
for information on using the Axis Unit for programming.
Back to the 1100
FAQ If this did not
answer your question or problem, please
contact our support department via email,
contact form or call (586)
781-2100
[ Back ] [ Up ] [ Next ]
|
