Downloadable Drawings - EnForce
System
|
 |
Note: Only Common Presses listed - Please
contact FEC with any special
requirements
enFORCE press drawings listed below
are for reference only. Although FEC tries to make these as
accurate as possible, slight variations may exist with the actual
presses.
|
enFORCE Fitting Press
Drawings
(Fitting presses generally
have a holding time less than 1 sec.) |
Right click the
links below, then choose "Save Target As" |
|
Part number |
Max. Load |
Max. Speed
(mm/sec) |
3-D (.IGS) file & PDF
(Compressed)* |
|
DPT-021R1-15FS |
1.96Kn
(0.44Klbs) |
416 |
 |
|
DPT-051R2-25FSB |
4.9Kn
(1.1Klbs) |
333 |
|
|
DPT-101R3-25FSB |
9.8Kn
(2.2Klbs) |
277 |
|
|
DPT-151R3-25FSB |
14.71Kn
(3.3Klbs) |
277 |
|
|
DPT-201R3-25FSB |
19.6Kn
(4.4Klbs) |
166 |
|
|
DPT-301R4H-25FSB |
29.4Kn
(6.6Klbs) |
320 |
|
|
DPT-501R4H-25FSB |
49.0Kn
(11.0Klbs) |
200 |
|
|
DPT-701R4H-25FSB |
68.7Kn
(15.4Klbs) |
133 |
|
|
DPT-102R5-25FGB |
98.0Kn
(22.0Klbs) |
116 |
|
|
DPT-152R5-25FGB |
147Kn
(33.0Klbs) |
77 |
Coming Soon! |
|
DPT-202R5-25FGB |
196Kn
(44.0Klbs) |
58 |
Coming Soon! |
|
enFORCE
Bonding Press
Drawings
(Bonding presses are used for
applications requiring a holding time greater than one sec.) |
Right click the
links below, then choose "Save Target As" |
|
Part number |
Max. Load |
Max. Speed
(mm/sec) |
3-D (.IGS) file & PDF
(Compressed)* |
|
DPT-021R3-15PSB |
1.96Kn
(0.44Klbs) |
208 |
|
|
DPT-051R3-25PSB |
4.9Kn
(1.1Klbs) |
95 |
|
|
DPT-101R4H-25PSB |
9.8Kn
(2.2Klbs) |
133 |
|
|
DPT-151R4H-25PSB |
14.71Kn
(3.3Klbs) |
114 |
|
|
DPT-201R4H-25PSB |
19.6Kn
(4.4Klbs) |
80 |
|
|
DPT-301R4H-25PSB |
29.4Kn
(6.6Klbs) |
64 |
|
|
DPT-501R5-25PSB |
49.0Kn
(11.0Klbs) |
58 |
|
|
DPT-701R5-25PSB |
68.7Kn
(15.4Klbs) |
42 |
Coming Soon! |
|
DPT-102R5-25PGB |
98.0Kn
(22.0Klbs) |
29 |
|
|
DPT-152R5-25PGB |
147Kn
(33.0Klbs) |
22 |
Coming Soon! |
|
DPT-202R5-25PGB |
196Kn
(44.0Klbs) |
16 |
Coming Soon! |
*The downloadable file contains both a 3-D IGS (IGES) file as
well as a 2-D PDF drawing for each model in a compressed (.ZIP)
format.
enFORCE press drawings listed above
are for reference only. Although FEC tries to make these as
accurate as possible, slight variations may exist with the actual
presses.
Last update:
July 22, 2008 04:10 PM
|
