AFC-1500 Downloadable Drawings

Page Menu

Downloadable Drawings - AFC 1500 System

Click on the following link below to go to that section;

STRAIGHT TOOLS HIGH SPEED TOOLS (single cable)

OFFSET TOOLS "U" TOOLS

AFC 1500 Tool & Spindle Assembly Drawings
Note: Only Common Tools have 3D files listed - Please contact FEC for additional sizes

AFC1500 tool drawings are for reference only. Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.

Straight Tools & Spindle Assemblies
Right click the links below, then choose "Save Target As"
Part number	Specifications	2-D PDF	3-D STEP file *with* cable	3-D STEP file no cable	3-D STEP file Std. Spindle Assembly
NFT-010RM1A-S	.98 Nm 1100 RPM				SA-12004-38
NFT-051RM1A-S	4.9 Nm 1100 RPM				SA-12004-38
NFT-101RM1A-S1	9.8 Nm 500 RPM				SA-12004-38
NFT-101RM1A-S	9.8 Nm 1100 RPM				SA-12004-38
NFT-201RM1A-S	19.6 Nm 500 RPM				SA-12004-38
NFT-201RM3A-S	19.6 Nm 790 RPM				SA-12001-38
NFT-301RM2A-S	29.4 Nm 600 RPM				SA-12004-38
NFT-401RM1A-S	39.2 Nm 250 RPM				SA-12004-38
NFT-401RM3A-S	39.2 Nm 790 RPM				SA-12001-50
NFT-601RM3A-S	58.8 Nm 790 RPM				SA-12001-50
NFT-801RM3A-S	78.4 Nm 500 RPM				SA-12001-50
NFT-132RM3A-S	127.5 Nm 395 RPM				SA-12003-50
NFT-202RM3A-S	196.1 Nm 222 RPM				SA-12002-50
NFT-302RM3A-S	294.1 Nm 150 RPM				SA-12007-75
NFT-502RM4-S	490.3 Nm 155 RPM		N/A		SA-12031-75
NFT-802RM4-S	784.5 Nm 100 RPM		N/A		SA-12045-10
NFT-103RM5-S	980 Nm 60 RPM		N/A		Contact FEC
NFT-153RM5-S	1470 Nm 60 RPM		N/A		Contact FEC
NFT-203RM5-S	1960 Nm 60 RPM		N/A		Contact FEC
NFT-303RM5-S	2942 Nm 39 RPM		N/A		Contact FEC
NFT-403RM5-S	3922 Nm 39 RPM		N/A		Contact FEC
NFT-503RM5-S	4900 Nm 22 RPM		N/A		Contact FEC

Offset Tools & Spindle Assemblies
Right click the links below, then choose "Save Target As"
Part number	Specifications	2-D PDF	3-D STEP file *with* cable	3-D STEP file no cable	3-D STEP file Std. Spindle Assembly
NFT-051RM1A-O	4.9 Nm 1100 RPM				SA-12005-38
NFT-101RM1A-O	9.8 Nm 1100 RPM				SA-12005-38
NFT-201RM1A-O	19.6 Nm 500 RPM				SA-12005-38
NFT-401RM1A-O	39.2 Nm 250 RPM				SA-12022-38
NFT-401RM3A-O	39.2 Nm 790 RPM				SA-12008-50
NFT-601RM3A-O	58.8 Nm 790 RPM				SA-12008-50
NFT-801RM3A-O	78.4 Nm 500 RPM				SA-12008-50
NFT-132RM3A-O	127.5 Nm 395 RPM				SA-12010-50
NFT-202RM3A-O	196.1 Nm 222 RPM				SA-12011-62
NFT-302RM3A-O	294.1 Nm 150 RPM				SA-12051-75
NFT-502RM4-O	490 Nm 155 RPM		N/A		Contact FEC
NFT-802RM4-O	785 Nm 100 RPM		N/A		Contact FEC

High Speed (Single Cable) Tools & Spindle Assemblies
Right click the links below, then choose "Save Target As"
Part number	Specifications	2-D PDF "A" / "C" Style	2-D PDF "B" / "D" Style	3-D STEP file no cable		3-D STEP file Std. Spindle Assembly
Part number	Specifications	2-D PDF "A" / "C" Style	2-D PDF "B" / "D" Style	"A" / "C" Style	"B" / "D" Style	3-D STEP file Std. Spindle Assembly
NFT-081RH1x-SA	7.8 Nm 3000 RPM					Contact FEC
NFT-211RH1x-SA	20.6 Nm 1220 RPM					Contact FEC
NFT-311RH1x-SA	29.5 Nm 855 RPM					Contact FEC
NFT-411RH1x-SA	40.2 Nm 635 RPM					Contact FEC
NFT-401RH3x-S	39.2 Nm 1980 RPM					Contact FEC
NFT-801RH3x-SA	78.4 Nm 1000 RPM	Contact FEC				Contact FEC
NFT-132RH3x-SA	128 Nm 580 RPM	Contact FEC				Contact FEC
NFT-202RH3x-SA	198 Nm 408 RPM	Contact FEC				Contact FEC

x= "A" : Cable exits motor towards end of tool (081, 401, 801, 132, 202 tools)
     "B" : Cable exits motor towards front of tool (081, 401, 801, 132, 202 tools) (Shown above)
     "C" : Cable exits motor towards end of tool (211, 311, 411 tools)
     "D" : Cable exits motor towards front of tool (211, 311, 411 tools)

"U" Tools
Right click the links below, then choose "Save Target As"
Part number	Specifications	2-D PDF	3-D STEP file no cable	3-D STEP file Std. Spindle Assembly
NFT-101RM1-SU	9.8 Nm 1100 RPM			SA-12004-38
NFT-201RM1-SU	19.6 Nm 500 RPM			SA-12004-38
NFT-401RM1-SU	39.2 Nm 250 RPM			SA-12004-38
NFT-132RM3-SU	128 Nm 395 RPM			SA-12003-50
NFT-202RM3-SU	196 Nm 222 RPM			SA-12002-50
NFT-302RM3-SU	294 Nm 150 RPM			SA-12007-75

AFC1500 tool drawings listed above are for reference only. Although FEC attempts to make these as accurate as possible, slight variations may exist with the actual tools.

Last update: January 05, 2012 01:29 PM