Accessories
- Socket trays are available in either a 4 or 8 socket base.
The socket tray can operate in a “smart” mode or Parameter
select mode. The “Smart” mode directs the operator to the next
socket in the operation and sets the parameter when the correct
socket is removed. The Parameter select mode sets the parameter
to the socket that is removed.
- All socket trays come with the browser based setup software
for tray configuration.
- Custom made socket inserts provide a custom fit to eliminate
operator placement error.
- Bright (Red /
Green) LED’s allow for proper
socket selection and fault indication
| Part |
Description |
Length/Width |
| ST004 |
Up to 4 sockets - sockets up to 1.25"
O.D. |
260mm (10.25") L x 122mm (4.8") W |
| ST008 |
Up to 8 sockets - sockets up to 1.25"
O.D. |
279mm (10.9") L x 217mm (8.56") W |
Special Heads
FEC can supply many different configurations for
special applications including; offset heads, Crowsfoot heads, Hold
and Drive heads, Tube nut heads, Sliding spindles, etc.
Contact FEC with your special requirements!
|
